How To Repair Hotpoint Washing Machine

Hotpoint Washing Car

Hotpoint Washing Machine

Installation

This instruction manual should exist kept in a prophylactic place for futurity reference. If the washing machine is sold, transferred, or moved, make sure that the instruction manual remains with the car so that the new owner is able to familiarise himself/herself with its operation and features.
Read these instructions carefully: they contain vital information relating to the condom installation and operation of the appliance.

Unpacking and leveling

Unpacking

1. Remove the washing machine from its packaging.
2.  Make sure that the washing machine has not been damaged during the transportation process. If it has been damaged, contact the retailer and do not proceed any further with the installation procedure.
3.  Remove the four protective screws (used during transportation) and the condom washer with the corresponding spacer, located on the rear part of the apparatus (run across figure).Hotpoint Washing Automobile
4. Shut off the holes using the plastic plugs provided
5. Keep all the parts in a safe identify: you will need them once again if the washing motorcar needs to exist moved to another location.

Packaging materials should not exist used every bit toys for children.

Leveling

1.  Install the washing machine on a apartment sturdy floor, without resting it up against walls, piece of furniture cabinets, or anything else.
2. If the floor is not perfectly level, compensate for any unevenness by tightening or loosening the adjustable front feet (encounter figure); the angle of inclination, measured in relation to the worktop, must not exceed 2°.
   Hotpoint Washing Motorcar

Leveling the machine correctly volition provide it with stability, assist to avert vibrations and excessive noise, and prevent it from shifting while t is operating. If information technology is placed on a carpet or a rug, suit the feet in such a way as to let a sufficient ventilation space underneath the washing machine.

Connecting the electricity and water supplies

Connecting the h2o inlet hose

1. Connect the supply pipe by screwing it to a cold water tab using a ¾ gas-threaded connection (see figure).
   Before performing the connexion, allow the water to run freely until information technology is perfectly clear.
2. Connect the inlet hose to the washing machine past screwing information technology onto the corresponding water inlet of the appliance, which is situated on
   the top right-manus side of the rear role of the apparatus (see effigy).
3.  Make sure that the hose is not folded over or aptitude.
   • The water pressure at the tap must fall within the values indicated in the Technical details tabular array (see side by side page).
   • If the inlet hose is non long enough, contact a specialized shop or an authorized technician.
   • Never use second-hand hoses.
   • Use the ones supplied with the machine.

Connecting the drain hose

Connect the drain hose, without bending it, to a drainage cutting or  wall bleed located at a peak between 65 and 100 cm from the floor;

Hotpoint Washing Machine

alternatively, remainder information technology on the side of a washbasin or bathtub, fastening the duct supplied to the tap (see figure). The free end of the hose should not be underwater.

Nosotros advise confronting the use of hose extensions; if it is absolutely necessary, the extension must have the same bore as the original hose and must not exceed 150 cm in length.

Electrical connections

Earlier plugging the appliance into the electricity socket, make sure that:

• the socket is earthed and complies with all applicable laws;
• the socket is able to withstand the maximum power load  of the appliance as indicated in the Technical information table(run into reverse);
• the power supply voltage falls within the values indicated in the Technical data table (see opposite);
• the socket is uniform with the plug of the washing machine. If this is not the case, replace the socket or the plug.
• The washing machine must not be installed outdoors, fifty-fifty in covered areas. It is extremely dangerous to leave the appliance exposed to rain, storms, and other weather weather.
• When the washing automobile has been installed, the electricity socket must be inside say reach.
• Do non use extension cords or multiple sockets.
• The cable should not be bent or compressed.
• The power supply cable must only exist replaced past authorized technicians.
• Alarm! The visitor shall not exist held responsible in the event that these regulations are not respected.

The starting time wash cycle

Once the appliance has been installed, and before you use information technology for the start time, run a launder cycle with detergent and no laundry, using the wash cycle 2.

Technical information
Model	ECO9F 1491
Dimensions	width 59.5 cm peak 85 cm depth 60 cm
Capacity	from 1 to nine kg
Electrical connections	delight refer to the technical information plate fixed to the machine
Water connections	maximum pressure level ane MPa (ten bar) minimum pressure 0.05 MPa (0.5 bar) pulsate capacity 62 liters
Spin speed	upward to 1400 rotations per minute
Energy rated programs according to regulation 60456	program vi; temperature 60°C; using a load of 9 kg.
	This apparatus conforms to the following EC Directives: – 2004/108/EC (Electromagnetic Compatibility) – 2006/95/EC (Low Voltage) – 2002/96/EC

Description of the washing machine and starting a launder cycle

Control panel

Hotpoint Washing Machine

• Detergent dispenser drawer: used to manipulate detergents and washing additives (see "Detergents and laundry").
• ON/OFF button with indicator light: switches the motorcar on and off.
  If the indicator light is illuminated, this indicates that the machine is switched on.
• Wash Wheel knob: programs the wash cycles. During the wash cycle, the knob does not move.
• SPIN SPEED button: sets the spin speed or excludes the spin cycle completely (run across "Personalisation").
• TEMPERATURE push: sets the temperature or the cold launder cycle (see "Personalisation").
• DISPLAY: indicates the fourth dimension remaining for the selected wash bike and, if a delayed start has been programmed, the fourth dimension remaining until the start of the wash bike.
• CONTROL PANEL LOCK push button with indicator light: activates or deactivates the control panel lock.

Hotpoint Washing Machine Function buttons with indicator light: used to select the available functions. The indicator light corresponding to the selected part volition remain lit.

WASH Bicycle PROGRESS indicator lights: used to monitor the progress of the wash wheel.
The illuminated indicator light shows which phase is in progress.
DOOR LOCKED indicator calorie-free: indicates whether the door may be opened or not (see next page).
START/PAUSE button with indicator light: starts or temporarily interrupts the wash cycles.
N.B. To break the wash bike in progress, press this button; the corresponding indicator light will flash orange, while the indicator low-cal
for the electric current wash bike phase will remain lit in a  fixed manner. If the DOOR LOCKED the indicator calorie-free is switched off, the door may be opened.
To showtime the wash cycle from the point at which information technology was interrupted, press this push again.

Standby mode
This washing machine, in compliance with new free energy-saving regulations, is fitted with an automatic standby system which is enabled after about xxx minutes if no action is detected.
Press the ON-OFF push button briefly and look for the automobile to first upwardly again.

Indicator lights

The indicator lights provide important data.
This is what they tin tell yous:

Wash bike phase indicator lights
As the WASH CYCLE knob is rotated, the indicator lights illuminate, indicating the stages which volition be performed by the machine in accordance with the selected wash bicycle.
Once the desired wash wheel has been selected and has begun, the indicator lights switch on ane by one to indicate which phase of the cycle is currently in progress.

Function buttons and corresponding indicator lights
When a function is selected, the corresponding indicator light will illuminate.
If the selected function is not compatible with the programmed wash cycle, the corresponding indicator low-cal will wink, a  sound point will
exist emitted and the role volition non be activated.
If a role is incompatible with another office selected previously, simply the most contempo selection volition remain active.

Hotpoint Washing Machine Temperature indicator light
When a temperature value is selected, the corresponding indicator calorie-free will illuminate.

Spin indicator light
When a spin value is selected, the respective indicator lite will illuminate.

Control panel lock indicator light
To activate the control panel lock, press and concur the button for approximately ii seconds. When the indicator light is illuminated, the control panel is locked. This means it is possible to foreclose wash cycles from being modified accidentally, especially where there are children in the abode.
To deactivate the command panel lock, printing and hold the button for approximately ii seconds.

Door locked indicator low-cal
If this indicator light is on, the appliance door is locked to preclude it from beingness opened accidentally; to avoid any damage, wait for the indicator light to switch off before y'all open the appliance door.
North.B. If the DELAY TIMER function is activated, the door cannot be opened; pause the machine by pressing the START/PAUSE button if yous wish to open information technology.
! If the Outset/Intermission indicator light (orange) flashes rapidly at the same time every bit the part indicator low-cal, this indicates a problem has occurred (come across "Troubleshooting").

Starting a wash cycle

1. Turn the washing machine on by pressing the ON/OFF button. All the indicator lights will plough on for a few seconds, then simply
   the indicator lights relative to the selected program settings will remain lit and the START/PAUSE indicator low-cal will flash.
2. Load the laundry and close the door.
3. Set the WASH Cycle knob to the desired program.
4. Set the washing temperature (see "Personalisation").
5. Set the spin speed (run across "Personalisation").
6. Measure out out the detergent and washing additives (meet "Detergents and laundry").
7. Select the desired functions.
8. Offset the launder cycle by pressing the Kickoff/Interruption button and the respective indicator light volition remain lit in a fixed manner, in dark-green.
   To cancel the set wash bicycle, interruption the machine by pressing the Outset/Break button and select a new bike.
9. At the end of the wash cycle, the indicator light will switch on. The DOOR LOCKED indicator lite will switch off, indicating that the door may be opened. Accept out your laundry and get out the appliance door ajar to brand sure the pulsate dries completely. Switch the washing machine off by pressing the ON/OFF push.

Wash cycles

Table of wash cycles

Wash cycles	Description of the wash bicycle	Max. temp. (t)	Max. speed (rpm)	Detergents				Max. load ,, (^g)	Wheel duration
				Prewash	Bleach	Wash	Material softener
Essentials cycles									The elapsing of the wash cycles tin exist checked on the display
one	Cotton + Prewash: extremely soiled whites.	ninety°	1400	•		•	•	9
2	Cotton: heavily soiled whites and resistant colors.	60°	1400		•	•	•	9
2	Cotton wool (ii): lightly soiled resistant colors.	forty°	1400		•	•	•	ix
3	Colored cotton wool (3): lightly soiled whites and delicate colors.	40°	1400		•	•	•	9
iv	Synthetics: heavily soiled resistant colors.	threescore°	800			•	•	4
four	Synthetics: lightly soiled resistant colors.	40°	800			•	•	4
five	Mix 15′: to refresh lightly scaled gatmerits airheaded (not suitable for wool, silk and apparel which require washing by mitt).	xxx	800	–		•	•	2.
Special cycles
half-dozen	Sanitizing cycle: extremely soiled whites.	90°	1400	–	•	•	•	9
6	Sanitizing wheel (1): heavily soiled whites and resistant colors .	sixty°	1400		–	•	•	9
7	Goodnight bicycle: lightly soiled frail colours.	40°	800		–	•	•	4
viii	Shirts	40°	600	–	–	•	•	2
9	Silk/Curtains: for garments in silk and viscose, lingerie.	30°	0	–	–	•	•	2
10	Wool: for wool, cashmere, etc.	40°	600	–	–	•	•	2
Eco cycles
11	Cotton	Cold Water	1400		–	•	•	9
12	Synthetics	Common cold Water	800	–	–	•	•	three
thirteen	Fast Wash	Colter Water	800	–	–	•	•	iii
Partials cycles
A	Rinse	–	1400		–	–	•	nine
B	Spin	–	1400	–	–	–		9
C	Pump out	–	0	–	–	–		9

The data contained in the table is intended as a guide simply.

For all Test Institutes

1. Examination wash cycle in compliance with regulation EN 60456: set launder wheel 6 with a temperature of 60°C.
2. Long launder cycle for cotton: set wash cycle 2 with a temperature of 40°C.
3. Curt wash cycle for cotton wool: fix launder cycle iii with a temperature of 40°C.

Specials wash cycles
Mix 15'(launder cycle 5) this launder cycle was designed to wash lightly soiled garments speedily: information technology lasts merely 15 minutes and therefore saves both free energy and fourth dimension. By selecting this launder cycle (v at 30°C), it is possible to wash different fabrics together (except for wool and silk items), with a maximum load of 1.5 kg.
Sanitizing cycle (wash cycle vi). A loftier-temperature hygienic launder bike (over 60°C) requires the use of bleach. Pour the bleach, the detergent, and the additives into the relevant compartments (come across paragraph entitled "Detergent dispenser drawer").
Goodnigt cycle (launder bike vii). This is a silent cycle that can be run at night when the electricity prices are lower. The wash cycle is designed for cotton fiber and synthetics. At the end of the bike the motorcar stops while there is still water in the drum; to spin and drain the laundry printing the START/PAUSE button; alternatively, the car will perform the spin cycle and drain the h2o automatically after viii hours.

Eco cycles
The Eco Cycles clinch free energy saving by eliminating the need for heating water and information technology's an advantage both to your free energy bill and the surroundings! These innovative Eco programs (Cotton, Synthetics, and Fast Wash ) are available for various fabrics and dissimilar quantities of garments; they take been designed to guarantee a loftier cleaning action even at low temperature and tin be used for lightly to medium soiled loads.
Eco Cycles give the all-time results thank you to an intensified wash action, water optimization and are carried out in the same boilerplate fourth dimension of a standard cycle.
For the best washing results with Eco Cycles, nosotros recommend the usage of a liquid detergent.

Hotpoint Washing Machine Personalization

Setting the temperature

By pressing the TEMPERATURE button to set the launder temperature (meet Table of wash cycles).
The temperature may be lowered, or even prepare to a cold wash ( ).
The washing motorcar will automatically prevent y'all from selecting a temperature that is higher than the maximum value set for each launder cycle.

Setting the spin speed

By pressing the SPIN SPEED button to set the spin speed for the selected launder wheel.
The maximum spin speeds available for each wash cycle are equally follows:

Launder cycles Cotton	Maximum spin speed
Synthetics	1400 rpm
Wash cycles Cotton	800 rpm
Wool	600 rpm
Silk	bleed but

The spin speed may exist lowered, or the spin cycle can be excluded altogether by selecting the symbol .
The washing machine will automatically prevent y'all from selecting a spin speed that is college than the maximum speed set up for each wash bicycle.

Hotpoint Washing Auto Functions

The various wash functions available with this washing machine will help to achieve the desired results, every time.
To activate the functions:

1. Press the button corresponding to the desired function;
2. the function is enabled when the respective indicator light is illuminated.
   Notation: If the indicator lite flashes speedily, this signals that this particular function may not be selected in conjunction with the selected wash wheel.

Delay timer
To set a delayed start for the selected wash bicycle, printing the button repeatedly until the desired delay time is displayed (this may be between ane hour and 24 hours).
To disable the function press the button until the text is displayed.
N.B. Once you have pressed the Commencement/Intermission push, the delay fourth dimension may merely be decreased if you wish to modify it.
! This option is enabled with all programs.

Super Wash
Because a greater quantity of h2o is used in the initial phase of the bike, and considering of the increased cycle duration, this function offers a loftier-performance wash.
! This function may not be used in conjunction with wash cycles five, 6, nine, 10, 11, 12, 13, A, B. C.

Actress rinse
By selecting this office, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is specially useful for sensitive pare.
! This office may not exist used in conjunction with launder cycles v, 13, B. C.

Easy fe
By selecting this office, the wash and spin cycles will exist modified in club to reduce the formation of creases. At the end of the wheel the washing motorcar volition perform slow rotations of the pulsate; the EASY IRON and START/PAUSE indicator lights will flash (orange) and the stage volition remain lit in a stock-still way. To end the cycle, printing the Beginning/Intermission button or the Easy Fe button.
For the Silk wash cycle, the machine volition end the cycle while the laundry is soaking, the Easy Iron and START/Interruption indicator lights will wink (orange) and the RINSE stage volition remain lit in a fixed manner. To drain the water so that the laundry may be removed, printing the Kickoff/PAUSE button or the EASY Fe push.
! This function may not be used in conjunction with launder cycles 5, vi, 7, 10, 11, 12, 13, B. C.

Detergents and laundry

Detergent dispenser drawer

Skilful washing results also depend on the correct dose of detergent: adding as well much detergent will non necessarily result in a more efficient wash, and may in fact crusade build-up on the inside of your appliance and contribute to environmental pollution.
! Practise non employ hand washing detergents because these create besides much foam.

Open the detergent dispenser drawer and pour in the detergent or washing additive, as follows.

Hotpoint Washing Automobile

compartment 1: Pre-wash detergent (pulverisation)
Before pouring in the detergent, brand sure that extra compartment iv has been removed.
compartment two: Detergent for the wash cycle (powder or liquid)
Liquid detergent should only be poured in immediately
prior to the start of the launder bicycle.
compartment iii: Additives (cloth softeners, etc.)
The cloth softener should not overflow the filigree.
extra compartment 4: Bleach

Bleach cycle

Bleaching may only be performed in conjunction with wash cycles ii, iii, 6.
Cascade the bleach into actress compartment 4; pour the detergent and softener into the corresponding compartments, then select one of the abovementioned wash
cycles.
This selection is recommended merely for very soiled cotton garments.

Preparing the laundry

• Divide the laundry according to:
  – the type of textile/the symbol on the label.
  – the colors: separate colored garments from whites
• Empty all garment pockets and check the buttons.
• Practice not exceed the listed values, which refer to the weight of the laundry when dry:
  • Durable fabrics: max. 9 kg
  • Synthetic fabrics: max. 4 kg
  • Frail fabrics: max. 2 kg
  • Wool: max. 2 kg

How much does your laundry weigh?

• 1 canvass 400-500 g
• ane pillowcase 150-200 one thousand
• ane tablecloth 400-500 g
• 1 bathrobe 900-1200 m
• 1 towel 150-250 chiliad

Garments requiring special care

• Shirts: use special wash cycle 8 to wash shirts in diverse fabrics and colors.
  Information technology guarantees maximum care is taken of the garments and minimizes the germination of creases.
  Silk: apply special launder cycle nine to launder all silk garments.
  Nosotros recommend the employ of a special detergent which has been designed to wash fragile clothes.
  Curtains: fold curtains and place them in a pillowcase or mesh bag. Employ launder cycle nine .
  Wool: is the only washing automobile manufacturer to take been awarded the prestigious Woolmark Platinum Intendance endorsement (M.0508) by the Woolmark Company, which means that all woolen garments may be washed in the washing machine, even those which country "hand launder only" on the label. Wash bicycle 10 , therefore, offers complete peace of mind when washing woolen garments in the washing auto (max. load 2 kg) and guarantees optimal operation.
  Load balancing organisation

Before every spin cycle, to avoid excessive vibrations and to distribute the load in a uniform manner, the drum rotates continuously at a speed that is slightly greater than the washing rotation speed. If, after several attempts, the load is not balanced correctly, the machine spins at a reduced spin speed. If the load is excessively unbalanced, the washing motorcar performs the distribution process instead of spinning. To encourage improved load distribution and remainder, nosotros recommend pocket-sized and large garments are mixed in the load.

Precautions and tips

This washing car was designed and constructed in accordance with international safety regulations. The following data is provided for rubber reasons and must, therefore, be read carefully.

General safety

• This appliance is not intended for employ by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
  experience and knowledge unless they accept been given supervision or instruction concerning utilise of the apparatus by a person responsible for their safe. Children should be supervised to ensure that they do not play with the apparatus.
• This appliance was designed for domestic use simply.
• Do not touch the machine when barefoot or with moisture or clammy hands or feet.
• Do not pull on the power supply cable when unplugging the appliance from the electricity socket. Concur the plug and pull.
• Do not open the detergent dispenser drawer while the machine is in operation.
• Do not touch the drained water as it may reach extremely high temperatures.
• Never forcefulness the porthole door. This could damage the safety lock mechanism designed to foreclose accidental opening.
• If the appliance breaks down, practice not under whatever circumstances access the internal mechanisms in an endeavor to repair it yourself.
• E'er keep children well away from the appliance while information technology is operating.
• The door can become quite hot during the launder bike.
• If the appliance has to be moved, work in a group of ii or 3 people and handle it with the utmost care. Never attempt to practise this solitary, because the apparatus is very heavy.
• Before loading laundry into the washing machine, brand sure the pulsate is empty.

Disposal

• Disposing of the packaging materials: observe local regulations so that the packaging may be re-used.
• The European Directive 2002/96/EC on Waste matter Electrical and Electronic Equipment, requires that old household electrical appliances must non be tending of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimise the recovery and recycling of the materials they contain and reduce the bear upon on human being health and the environment. The crossed-out "wheeled bin" symbol on the product reminds you lot of your obligation, that when yous dispose of the appliance it must be separately collected.
  Consumers should contact their local authority or retailer for information apropos the correct disposal of their old appliances.

Opening the porthole door manually

In the outcome that it is non possible to open the porthole door due to a power cut, and if you wish to remove the laundry, proceed equally follows:

1. remove the plug from the electrical socket.
2. brand sure the h2o level within the motorcar is lower than the door opening; if it is not, remove excess water using the drain hose, collecting it in a bucket as indicated in the figure.
   Hotpoint Washing Motorcar
3. using a screwdriver, remove the cover panel on the lower front end role of the washing machine (see effigy). Hotpoint Washing Automobile
4. pull outwards using the tab equally indicated in the figure, until the plastic necktie-rod is freed from its stop position; pull downward and open up the door at the same time.
5.  reposition the panel, making sure the hooks are deeply in place before you push it onto the appliance.

Care and maintenance

Cutting off the water and electricity supplies

• Turn off the water tap after every wash cycle. This will limit habiliment on the hydraulic arrangement inside the washing machine and help to foreclose leaks.
• Unplug the washing machine when cleaning it and during all maintenance work.

Cleaning the washing machine

The outer parts and rubber components of the apparatus can be cleaned using a soft cloth soaked in lukewarm soapy water. Do non utilize solvents or abrasives.

Cleaning the detergent dispenser drawer

Remove the dispenser past raising it and pulling it out (see figure).
Launder it under running water;  this operation should be repeated frequently.

Hotpoint Washing Car

Caring for the door and drum of your appliance

• Always leave the porthole door ajar in order to forbid unpleasant odors from forming.

Cleaning the pump

The washing machine is fitted with a self-cleaning pump which does not require any maintenance. Sometimes, small items (such equally coins or buttons) may fall into the pre-chamber which protects the pump, situated in its lesser part.

! Make sure the wash cycle has finished and unplug the appliance.
To access the pre-bedroom:

1. using a screwdriver, remove the cover panel on the lower front end part of the washing machine (run across figure);
   
2. unscrew the lid by rotating it anti-clockwise (encounter figure): a little water may trickle out. This is perfectly normal;
   
3. make clean the within thoroughly
4. screw the hat dorsum on;
5.  reposition the console, making sure the hooks are deeply in identify before yous button it onto the appliance.

Checking the water inlet hose
Check the inlet hose at to the lowest degree once a twelvemonth. If there are any cracks, it should be replaced immediately: during the wash cycles, water pressure is very potent and a cracked hose could easily dissever open up.
Never utilize second-hand hoses.

Troubleshooting

Your washing machine could fail to work. Before contacting the Technical Assistance Centre (see "Assistance"), make sure that the problem can be not solved easily using the following list.

Problem:	Possible causes / Solutions:
The washing machine does not switch on.	The apparatus is non plugged into the socket fully, or is not making contact. At that place is no power in the house.
The wash wheel does not start.	The washing car door is non closed properly. The ON/OFF button has not been pressed. The Kickoff/PAUSE button has not been pressed. The water tap has non been opened. A delayed start has been set up (using the Delay Timer, see "Personalisation").
The washing machine does not take in h2o (the indicator lite for the get-go wash cycle stage flashes rapidly).	The water inlet hose is not connected to the tap. The hose is bent. The water tap has not been opened. There is no water supply in the house. The pressure is also depression. The START/PAUSE push has non been pressed.
The washing machine continuously takes in and drains water.	The drain hose is not fitted at a pinnacle between 65 and 100 cm from the floor (see "Installation"). The free end of the hose is underwater (see "Installation"). The wall drainage system is non fitted with a breather pipe. If the problem persists even later on these checks, turn off the water tap, switch the apparatus off and contact the Assistance Service. If the dwelling is on 1 of the upper floors of a building, there may be issues relating to water drainage, causing the washing machine to make full with h2o and drain continuously. Special anti-draining valves are available in shops and assist to avoid this inconvenience.
The washing machine does not bleed or spin.	The wash cycle does not include draining: some wash cycles require the bleed phase to exist started manually. The Easy Iron role has been activated: To complete the wash bike, press the START/PAUSE button ("Personalisation"). The drain hose is bent (run across "Installation"). The drainage duct is chock-full.
The washing machine vibrates a lot during the spin wheel.	The drum was not unlocked correctly during installation (see "Installation"). The washing machine is not level (see "Installation"). The washing car is trapped between cabinets and walls (come across "Installation").
The washing machine leaks.	The h2o inlet hose is not screwed on properly (run across "Installation"). The detergent dispenser drawer is blocked (for cleaning instructions, see "Care and maintenance"). The drain hose is not fixed properly (see "Installation").
The START/PAUSE indicator light (orange) and the function indicator lights flash apace.	Switch off the automobile and unplug it, wait for approximately 1 minute, and then switch information technology back on over again. If the problem persists, contact the Technical Assistance Service.
There is also much foam.	The detergent is not suitable for machine washing (information technology should display the text "for washing machines" or "hand and automobile wash", or the like). As well much detergent was used.

Service

Earlier calling for Assistance:

• Check whether you tin can solve the problem alone (see "Troubleshooting");
• Restart the program to check whether the problem has been solved;
• If this is non the instance, contact an authorized Technical Assistance Eye using the phone number provided on the guarantee certificate.
  ! Always asking the assistance of authorized technicians.

Accept the post-obit information to mitt:

• the type of problem;
• the apparatus model (Mod.);
• the series number (Due south/N).
  This information can be establish on the data plate applied to the rear of the washing machine, and can also be found on the forepart of the apparatus by opening the door.

https://www.hotpoint.co.uk/
Hotpoint Washing Machine User Guide
Click to Read More than Hotpoint Manuals

Documents / Resource

Source: https://manuals.plus/hotpoint/washing-machine-manual-2

Share this post